Throttle Position Sensor Reset A Comprehensive Guide to Engine Optimization

Turn on the IGNITION SWITCH, wait for the CEL (Yellow engine light) to turn OFF.... ... Turn off IGN only... wait for 10 seconds and repeat this ... The Throttle Position Sensor, or TPS for short, measures how much the gas pedal is pressed and sends that info to the engine's computer. This ... Reset the Throttle body Position and acceleration idle · Turn on ignition but don't start the car. (KOEO) · Depress gas pedal to the floor for at ... A lot of people have asked me if they should perform a throttle position sensor reset when their car starts to idle like crap or hesitate ... On some vehicles there is an actual procedure like turn the key forward, hold the gas pedal at WOT, turn the key all the way forward w/o starting while pulling ... Hold throttle wide open for slow 5 count. Let throttle SNAP shut/closed. Cycle kill switch (off then on). Start bike, and enjoy the ride. Step 3: Depress the accelerator REALLY slowly...Driving Miss Daisy with a touch of Cocoon slowly...all the way to the floor. Step 4: Release the ... A quick description of how to reset the TPS (Throttle Position Sensor) on your motor to the factory default setting. A KTM 350SX throttle ... This is the easiest and fastest way to set and test your throttle position sensor. Why do you need to calibrate your TPS? turn key on, wait for dinging to stop, a few seconds, push throttle pedal slowly to the floor, then let off quickly, turn key off. Repeat this ...