Revamp Your Ride Resetting Throttle Position Sensors for Optimal Engine Function

1) With the car off and key out of the ignition, put the accelerator pedal to the floor and hold it there. 2) Insert the key, turn to the on ... Turn the key on, but don't start. Step on the accelerator, push it slowly to the floor, and then let it come back up very, very slowly. Turn key off, then ... To reset the throttle control on Your 2004 Ford F-150 turn the key to the on position(engine off). Then slowly depress the gas pedal all the ... A quick description of how to reset the TPS (Throttle Position Sensor) on your motor to the factory default setting. A KTM 350SX throttle ... Throttle Position sensor. this sensor controls how much air enters the engine by. measuring how to open the throttle valve. when you press the ... General Tech - [Tutorial]How to reset throttle position sensor - Hi Guys, I had throttle problem , car was shaking and turning off so I ... On some vehicles there is an actual procedure like turn the key forward, hold the gas pedal at WOT, turn the key all the way forward w/o starting while pulling ... Turn on the IGNITION SWITCH, wait for the CEL (Yellow engine light) to turn OFF.... ... Turn off IGN only... wait for 10 seconds and repeat this ... :confused: MOGolf said: Key on with engine off. Push go pedal to the floor for at least 5 seconds. Release pedal. Turn key off. ... Do I get any kind of light or ... Hold the pedal all the way down for 20 to 30 seconds. Depress the Start/Stop button as if turning off the engine. Remove the foot from the gas ...