Control Refined The Ultimate Guide to Pilot Wires

If you manage to pull out the radio you can tap into that because the antenna remote (that feeds the antenna amplifier) is switched with the radio. The wire for the power antenna is White/Black stripe. Hook it up to your blue wire on the deck. If your radio doesn't have a blue wire for power ... It is a remote turn on wire or a 12 volt output to power up an amplifier or lighting or anything that requires 12 volts when the radio is on! Yeah trace the wire back into the car and see if there's an issue with the wiring somewhere. I think you can use the power antenna wire, too. I ... The power antenna wire on your aftermarket harness gets hooked to the blue or blue/white wire on your deck. There should be 2 blue wires. 1 is the power antenna wire, the other is the amplifier turn on wire. I haven't seen a head unit in the last 20 ... The wire on that adapter corresponds to an empty terminal on the truck plug it connects to, so it truly does not matter. It is for retractable antennas. I am installing a Kenwood DNX-6140 in the wife's '01 Sequoia. I noticed the aftermarket wiring harness adapter has a blue jumper wire ... Also look along the length of the cable and see if it has a type printed on it (like RG-xx). Then go to a local ham radio store and ask if they ... The Lexus factory harness doesn't use the traditional antenna power color used by most aftermarket stereo manufacturers (blue, or blue/white).