Dismantle Resistance The Ultimate Guide to Removing Stripped Lug Nuts

Like it's stuck on the stud in the hub? Hammer a smaller socket on and try to get it off with a ratchet. Or just remove the stud totally and ... Hammer the tool toward the bottom until the cover splits. Then remove the cover like peeling an onion. Lastly find a socket that fits the inner ... Second is to plug-weld a new nut onto the end of the old nut and then use the new nut to get it off. That always works since the welding heat ... One fix is to buy a proper six point socket and breaker bar to remove and install the nuts by hand, and use a proper torque wrench, not a Torque stick. Yes, you can cut some grooves with a Dremel, break out a hardened chisel with a 3lb hammer and start beating away. In the end, your bound to ... if you're careful with a torch, you can apply some heat to it and drive a slightly smaller socket onto a stripped lug, then try to turn it out. Try to get it out with pointy chisel. Something like: Just angle it so when you smack it with hammer, it will go into the nut, and slightly rotate it. You can poke a hole through the top of the center of the lug with a hammer and screwdriver then use needle nose pliers to rip and shred the rest of the cap. Take a Chisel and chisel away the chrome around the lug, use some needle nose pliers to pull the chrome off the actual lug underneath! I had to ... Our team at Off-Road Rim Financing offers wheels and tire financing and will explain how to remove a stripped lug nut and get you back on the road.