Unlocking the Truth Key Stuck in Ignition, Solved!

Sometimes lock cylinders just wear out and get sticky. I would go ahead and replace the lock cylinder. I had the same thing happen on my Chevy ... it is possible the key cylinder to ignition switch connection is not timed properly. Dec 19, 2022 | 04:53 PM. Try starting the car, creep a little forward or back, then keep your foot firmly on the brake, still keeping it in drive (or reverse), then pull up on the hand ... I've had a problem with my key getting stuck in the ignition. It turns, starts, turns off but won't come out. I've jiggled it and messed with it, but still, it ... Well- it turns out it was a dead battery. Anti theft detterent causes the key to lock in the ignition. I called AAA this morning and I'm back in ... Try wiggling the shift lever forward and/or back to see if you can pull the key. Also try turning the steering wheel. That can jam the key too. Check the condition, and the tightness of your battery connections. They can loosen up over time. You should not be able to wiggle the terminals ... I was inside my vehicle with windows rolled up in 100 degree weather at a red light. The car stopped, battery died without warning and just ... It's probably a electromagnet or a spring that winds when the key is turned. I've never seen one go bad but there's a first time for everything. If it's a bit sticky you can try shifting back into Neutral then firmly shifting into P. (You may need to stick a small stick/pen into the flap ...