Key Stuck in Ignition Panic? Here's Your Troubleshooting Guide

If you have not had the ignition lock recall done then its likely the tumblers in the lock have failed and you will need to have it hauled to ... My key was stuck in the ignition. I tried the “jiggle-wiggle-turn the steering wheel advice. Nothing worked. Then, I stumbled on a post (not sure where) and I ... The gear selector unit will lock the key if it thinks the vehicle is in gear, there might be something else behind the steering wheel thats part ... Can the ignition key be fully inserted into the ignition lock cylinder and be rotated without sticking in any position? ... Inspect for an ... What has happened is the tumbler is jammed in the ignition switch and it will need to be replaced to fix this issue. You can try tapping the ... Reasons why keys get stuck in the ignition ... force, your damaged key can become jammed once inserted into the ignition. ... The wafers are damaged – The wafers ... ... link and make a purchase. This helps support my channel and allows me to continue to make videos like this. Thank you for your support! I've had a problem with my key getting stuck in the ignition. It turns, starts, turns off but won't come out. I've jiggled it and messed with it, but still, it ... I use a little Wd 40 or silicone spray lubricant on the key and insert the key several times . This keeps the inside of the tumbler slick when ... Another easy method for removing a stuck key is to push down on the key cylinder with your left index finger while simultaneously jiggling the ...