P0410 Mastery The Essential Guide for Automotive Professionals

the 410 code is created when the O2 sensor does not indicate a change in the O2 output voltage when the air pump is turned on by the PCM. on ... It almost chokes out on fuel because it is expecting that air from the air pump but nothing comes through. You can bench test the air pump off ... Check the air change over valve. Remove vacuum hose of air changeover valve. If vacuum is present at the air changeover valve, check air supply ... P0410 or 64 bike dash code. It's related to the pair (air switching) valve. If you have the pair valve removed/disconnected, did you disable the pair valve ... I have an Innova 3100f scanner. I pulled a "P0410 Secondary Air Injection System" code this AM. Would love to find where the complete list of ... The P0410 code refers to the emissions system. The AIR pump puts air to the exhaust to lower emissions. P0410 is the secondary air pump circuit. If the relay fails when open replace the relay block in the module box on the right side of the engine ... The system is called secondary air injection and all it does is pump air into the exhaust manifolds to get the catalytic converter heated up when the engine is ... It is an issue with the Cobb Accessport Flash. He said the ECU controls the pump and that the Stage 1 flash is causing the problem. Need some help here, I keep getting a p0410 code for the secondary air system. I tested the air pump with 12v and everything works as it should.