P0410 A Comprehensive Guide to Emissions System Performance Optimization

Need some help here, I keep getting a p0410 code for the secondary air system. I tested the air pump with 12v and everything works as it should. General Technical - Fault Code P0410 Secondary Air Injection System - Lads have a lightly modded 2.5ltr STI 2006. Remapped with TSL exhaust ... A secondary air injection (AIR) pump is used on this vehicle in order to lower the tail pipe emissions during start-up. Yes, the m119 egr tube clogs the same way the 104 tube clogs. The head passages for the egr are less likely to clog. S2000 Under The Hood - P0410 secondary air injection system malfunction - just bought a 2001 formula red s2000 with cel light on. The 410 when you first start the car the air pump will run for a short time to help warm the catalytic converter,any way the causes can vary. the 410 code is created when the O2 sensor does not indicate a change in the O2 output voltage when the air pump is turned on by the PCM. on ... Reset it, then take it immediately and get it inspected before the car has a chance to think twice. Get it good & hot before you take it in and ... Those two codes are often caused by a vacuum leak - broken or disconnected hose for the secondary air injection system (SAI). There are plenty ... The P0410 code refers to the emissions system. The AIR pump puts air to the exhaust to lower emissions.