Unlocking the P0141 Code A Key to Automotive Efficiency

It sounds like a transient reading. Each time you start the car and begin to drive, the computer checks to make sure that the proper current is flowing through ... Reading the ODBII codes gave me error P0141, Sensor 1, Bank 2. So I did some googling, and I was pretty sure that this was the "rear" o2 sensor (easy access ... It seams that once the sensor is heated, the code stays off. Sensor has a heater element in it that is not working, I guess. Have same problem with two brand ... This trouble code typically points to a damaged sensor heater or related wiring. Similar trouble codes include P0135 and P0420. 2nd Gen Ram Tech - P0141 code - P0141 O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2) Is this the one beind the cat? It came up with code P0141 - O2 Sensor Heater Circuit (Bank 1 Sensor 2). The car also exhibited the classic poor idle quality associated with an ... The P0141 code is a problem with the O2 bank 1 sensor 2 heater circuit. So, this will be the sensor or the wiring. I would raise the car up and check the work ... P0141 is the heater circuit/function for that O2 sensor. Anytime you get a code the only thing you know is that circuit/function has a problem. Code P0141 is set when the Rear Oxygen Sensor does not show signal activity indicative of closed loop fuel system operation within the required time. Replaced O2 sensor with the Bosch ( probably should have used AC Delco ) and still getting 2 codes on the CenTec scanner.