Precision Medicine for Arthritis P0068 Leads the Way

P0068 - There is a difference between the Manifold Absolute Pressure (MAP), Mass Air Flow (MAF), and Throttle position sensor (TPS) voltage values. P0068 (Manifold absolute pressure / mass air flow - throttle position correlation). Cleared the code and started the car. It ran very rough, seemed like air/ ... P0068 error code ... Just threw a P0068 code. ODB says correlation between throttle body position and MAF/MAP sensors. I also read this can be due ... Im assuming the sensor is ok and scaked correctly. You should see 1 bar or 14psi with ignition on and engine stopped, that atmospheric pressure. P0068 - is a code that is set when the PCM, the engine - can't set mixture with the results it's getting from two sensors. ... Uses the ... I scanned the codes and came up with P0068, P0300, P0302. The former are both misfires and the first one related to throttle position or MAF sensors. The code he pulled was P0068 MAF/MAP Sensor Throttle Position Correlation. The owner replaced the MAP and the Throttle position sensors and the code came back. Reading up on the P0068 code points to very generic causes (ie, vacuum leak, bad plugs, bad MAP, throttle body position problems). p0068 - Throttle Body Air Performance p0113 - Intake Air Temperature sensor circuit high voltage p0102 - MAF sensor circuit low frequency The P0068 appears to be a mismatch in input from the MAF, MAP, or TPS sensors. I was low on gas but not that low so I went across the street to a gas station.