Automotive Excellence Jacking Up On Brakes for Performance

I guess if you had very large wheels, with large openings, you could bleed the brakes through the wheels. I think a scissor jack is adequate ( ... You will not damage anything if you turn the star wheel without the vehicle jacked up. Turning the star, then jacking and testing is the ... When the oil is cold and viscous, it will not shear well between the clutch discs causing drag. So you jack up a rear wheel with the E-brake ... If your vehicle is an automatic, put it in park. If it's a standard, put it in first gear. Then, be sure to set your parking brake, and chock the wheels that ... you can buy a set, but make sure they have low profile extender ramps. i then jack up the front of the car at the factory jacking point, put ... I can never leave the car undriven for that long when I have it) then I am assuming the brakes will have siezed. Is it best to put it in neutral ... new Cavalier owner - want to raise my car to get a look at the left side front brakes - where is the best spot to place the hydraulic floor jack ... Yesterday I jacked the car up to work on the brakes and rotate the tires. I had the car on four jackstands at each wheel. After finishing ... My concern is the car rolling off the ramps once I jack up the rear, since the brakes aren't engaged in the front, obviously. Since both ... I also use wheel chocks on the other two tires and the parking brake is on so the car doesn't roll. I lift each jack a little at a time, doesn't ...