Car Maintenance Simplified Jacking Up for Brakes

Try driving the front wheels onto a couple of planks to raise the car a bit, hopefully sufficient to get the jack under it. Just jack up one side at a time. Take the wheel off, then slip the the wheel under the rocker for safety... if the jack slips, it will fall on the wheel. The two jacking points are either end of the vehicle, where you would place your floor jack to bring the vehicle up enough to place your jack ... My plan was to jack the car up with a low profile floor jack somewhere in the center to get both rear wheels up in the air and then place the jacks in place ... If I'm ever working on a car, like doing a brake job or whatever, I jack the car up with a floor jack, and then put it on jackstands so it ... Eg hand brake and chocks if you're jacking the front up, leave it in gear and use chocks if you're jacking the back up (assuming it's a fwd car. I have to do the rear brakes this weekend and the fronts in the next two weeks or so. Just want to get the Bronco II up safely. Thanks in ... For extra safety (or if you forget to loosen the lug nuts), you can wedge a piece of wood between the seat pan and the brake pedal to engage the front brakes. If you don't need the rear wheels to turn in the air, use a telescoping rod to keep the brake pedal depressed. Ideally, if you are working on a ... It would depend on what type of jack you are using. When you use a floor jack, as you lift the jack up, it tends to want to pull the vehicle toward it.