Illuminating the Shadows Understanding Backup Light Color Options

Hi All,I recently bought an aftermarket backup camera for my Journey and I'm looking for the reverse light wire color to hook in with the ... The instruction said to connect it to the reverse lights negative and positive wires. But because the reverse light wires are blue and green and ... All BkUp lamp wiring that I found in the Av is Lt. Green. Even at the BCM. Trailer wiring also. They don't differentiate left & rt (with wire ... ... light itself, and you can then chose to view it's location in the chassis and the pin-assignment/wire colors at that connector. Easy-peasy ... Cut the green wire and run it to the B&M switch. Un plug the factory plug from the switch on the colum and put a jumper wire between the two ... I'm confused. White/light green is both backup AND stop on the right side? 2007 R/T ... The wire you need to splice into in order for the camera to turn on when you put the car in reverse is the on the DRIVER'S SIDE, and it is the BROWN WIRE. It is the blue/white wire as jrod5150 has pointed out. It powers the reverse light bulbs. However, if you are installing a stereo unit then using the correct ... I did not need any wire from the truck for the backup camera. The camera has three wires - black and red go to the reverse light wire and ground ... The pair of e3 reverse lamp wires are German color coded as gr/ge (which would be Gray/Yellow) and br (with would be brown). Note: Brown wires ...