Ignition Switch Woes Diagnosing Why It Resists Turning Left

I found that "tilted down a little" is the preferred way but I had to remove the lower panel again to get it right. With the steering lock back ... Now check the main fuse and wiring to the ignition switch for power. Check that power goes through the ignition switch when it is turned on. Anyone having this problem: remove the shift knob so you see just the lever and button and try to fully turn the car off and take the key out again. If you have ... In this video I will help you think through the basics of your tractor electrical system, particularly the key switch with three positions: ... I changed the ignition barrel and the key still would not turn. So, I took my old one home, drank a couple beers and disassembled it. I found ... Key will not physically come all the way back to 0-LOCK position on the ignition cylinder. It comes about 70% back from 1-ACC towards 0-LOCK. When the switch at the shifter fails, it locks up the ignition. Try bumping the shifter handle to see if that helps, if so, you may have to get ... If no power to the solenoid, check battery cables and connections. Actually, that should have been done well before you even suspect the ... Double check that the ignition switch harness 6-P connector is securely attached to the driver's under-dash fuse/relay box. First, disconnect the battery. Do it ASAP, like now. Then take your steering column apart, and have a look for fried wires.