Ignition Switch Dilemma Why It's Ignoring the Leftward Command?

Check voltage at the small terminal on the solenoid when you turn the key to "start" if you are NOT getting a click. I will say, if you are ... In today's video, Jake delves into the crucial role of the ignition switch in your vehicle, how it operates, the various symptoms indicating ... ... doesn't interface with the ignition switch coil, distributor, or starter. ... turn signal switch, the left signal came on, and vice-versa. If this doesn't work, it could be that the exciter cable that "switches on" your starter has become dislodged or snapped. The problem could also ... I get back in my car, and the key will not turn to the right. I try ... doesn't get one signal after another it won't start the engine ... I'm pretty sure it doesn't but they can insist. If I read right that you put the fob into the switch and it comes out wet with water, you ... Did you have the ignition switch off the column? You may need to adjust it OR you may have a bent pin on the switch. Here's an informative video ... A bad lock cylinder typically won't turn at all when you put the key in, or it won't pop up when the key is removed. If it turns at all from ... Issue #1 - After unwrapping 1/2 a roll of electrical tape, I discovered with the PO left behind. I am very tempted to cut them and splice new ... The factory ignition switch will need a jumper wire between Ign1 and Ign2 post on your starter switch in order for the coil to have power while ...