Unlock the Power of Your Engine Supercharger Bypass Valve Normally Open

I wanted to open a discussion around how to approach the topic of setting up the tune for bypass valves that release the boost pressure back into the inlet ... During idling or part throttle non boost operation, the bypass valve is held "open" by engine vacuum (10"-22"Hg). This allows the compressed air ... There is a set screw used to stop the bypass blade that holds it open a bit. I left it as shipped from Whipple but I'm wondering if it is even ... The boost bypass valve is a valve that controls when air is allowed to be pressurized in the intake manifold by the supercharger. During normal operation, the ... ... bypass valve control circuit open. I was able to turn off the car and restart and it would run normal but when I got into heavy load and ... Can the SC bypass valve be controlled with the stock PCM to open at a specific RPM ... boost, usually in reverse, etc. Basically the boost solenoid is to open the bypass valve to bleed off boost. This is done to prevent overboost and control boost say in ... Once there is more rpm, and then engine vacuum is low, the valve closes forcing all intake air to go through the supercharger into the manifold ... So I am FULLY aware of the fact that normal operation shows a supercharger bypass/surge valve to be open at all times until it sees 0 MAP or ... So, the first thing I would do is remove the actuator and check the valve for smooth operation all the way open and closed. If it is stiff or ...