Unleash the Potential The Comprehensive Guide to E36 M3 Rear Spring Pad Thickness

Get a piece of 5mm thick rubber mat and cut a circular piece that fits above the upper spring seat. That should raise the car about 1/4 inch. My E36 328 used to lean, I bought a 10mm spring pad from BMW (less than a fiver)and fitted it above the OSR spring. Car now sits level, and ... Vorshlag Rear Spring and Ride Height Adjustment kit for BMW E30/E36/E46 · 60mm x 6" x 350 #/in · 60mm x 6" x 450 #/in · 60mm x 5.5" x 571 #/in · 60mm x 5.5" x 628 ... I shall go with 8mm pads! ... Overall they approved and are happy to install them for me, I shall go with 12mm (8mm spacer) and report back with ... From someone that HAS done it with H&Rs. Roffle Waffle is correct, the rear definitely sits lower w/o the 15mm spring pads. Then I came across this thread (https://www.e46fanatics.com/threads/koni-e36-m3-rear-shock-on-e46-non-m.978028/) on E46F, talking about using ... For Bilstein coilovers (I have 48-245463) the upper perch spring seat has an OD of 59.3 mm, so a 60 mm ID spring fits perfectly. · I used Energy Suspension 96103 ... Thanks for that, checked real oem 1st, and with my car details only found the 5mm pads, tried some other ones just know and got the 14.5mm, but ... ... thicker spring pad on one side to level it out. I'll get some pics up soon ... It should be known that ALL M3's do have rear subframe reinforcements, but not ... Coil Spring Compressors · Hub Tools · View more. Brake System Tools; Brake ... If your vehicle has specific Brake Discs for each side (e.g. some BMW M3 ...