Unleashing the Power The Definitive Guide to Resolving the P0018 Code

P0018 indicating that the camshaft position sensor A for bank 2 does not correlate to the signal from the crankshaft position sensor. The error points to a mis-match, it is possible that one of them just isn't working correctly, especially since the problem is intermittent. Dodge Challenger - code p0018 - i have a 2012 challenger it has the 3.6 liter engine. my check engine light came on and it shows code p0018 ... The code is a red herring. Having valve timing way out is usually quite drastic. That would point towards a camshaft timing gear or something like that. Symptoms of a P0018 will or may include: Malfunction Indicator Lamp (MIL) illumination; The engine may run but with reduced performance; The engine may crank ... I have a 2012 Hyundai Santa Fe GLS 3.5L V6 and the car is misfiring at idle with check engine light. I hooked up my Autel scanner and it shows: The issue is a Check Engine & Traction light, along with NO OVERDRIVE all due to a Traction Management Issue caused by a P0018 DTC. Dirty oil build up causes a lot of problems with this engine. Don't let it go low, over 5k between oil changes or 3 months. I have P0018 Crankshaft position- Camshaft position correlation Bank 2 sensor A which is driver side intake cam. I would guess that you either have a faulty crankshaft position sensor or bad camshaft adjustment solenoid. Both are easy DIY bolt on replacements and not too ...