Unlocking the Secrets of P0335 A Comprehensive Guide to Diagnosis and Solutions

The crankshaft sensor is located passenger side just above oil pan gasket in front of transmission housing just a caution they do get stuck and break off. I got issues with my 2005 G35 sedan. Having trouble codes P0335 Crankshaft Position Sensor A Circuit. I replaced with aftermarket Crankshaft position sensors. That's definitely a CPS code. Usually only happens if the sensor is shorted or open circuit. Double check there isn't a problem with the harness ... P0335 Code - hard starting ... having trouble starting and having erratic throttle when the engine is cold. Intermittently I'm getting a check ... The car starts, it drives, but the only problem is that it has a P0335 (Crank sensor no signal) code - meaning I can't go above 3k rpms, along with being stuck ... This P0335 code pops up, I noticed it says “circuit” is the wire itself that connects to the sensor or do I need another sensor. Engine, Drivetrain & Forced-Induction - P0335 - Crankshaft Position Sensor - Hey guys, So I'm getting a p0335 code when i get into high rpm ... A code P0335 could mean one or more of the following has happened: a wire or connector in the circuit could be grounded/shorted/broken, the camshaft position ... The crankshaft position sensor is located in the area of the timing belt so perhaps the sensor or wire or connector was damaged to trip the ... This fault code means NO CKP sensor signal for 2 seconds at engine cranking. So it is only checked on initial cranking which explains why it can ...