Zero Hassle A Beginner's Guide to Removing Plastic Underbody

Clip-tools designed to remove the plastic clips by getting under them and allowing you to pop them out; Wedging pry bars designed to get under ... Start by finding the fasteners and clips that keep the underbody plastic in place. These parts are usually at the panel's edges and corners. If your car has these plastic shields, it's not really a matter of ... remove which I love. Removing older fasteners is usually a pain ... They are there to keep everything clean and to create better aerodynamics. Very simple to remove. I think most are held by 8mm head screws. And yes, they weigh ... Use a small detailing brush or an old toothbrush for hard-to-reach areas. Use a plastic scraper or old credit card to remove caked-on grime. For particularly ... Remove,grind,treat,etch,prime,paint. ... Oh yeah, and I take care to spray the bejeezus out of the FJ's undercarriage at the local car wash during ... You unscrew them until they stop backing out, They will usually free-spin when they're half way out. You then use a plastic rivet removal tool. From your picture it looks as if they are designed to be twisted a half-turn, then pried out. I know that often, plastic underbody and wheel- ... ... plastic pin the fix might be one that lasts longer or is more of a ... The large felt/fiber panel that covers the underside of the car ... Lower the shield Remove all fasteners then let the underbody shield drop down and swing open. Using your hands, hold one side of the vehicle ...