Simplify the Process Removing Plastic Underbody Shields in a Breeze

This big plastic cover came undone in the front of my car. It's still attached, just on the back, so it's dragging on the ground. ... car. As I drove away I heard something dragging, and eventually I ... It's been holding up for years. First ever one ... IIRC, you just untwist as you pull down on them with a needle nose pliers. I've actually replaced a few for not holding well and having the ... ... car? I have read ... I couldn't tear it off cuz most of it was being held on by strong plastic clips that I didn't want to pop or remove. They're shaped like a U, you just need to flex the bottom part of the tab down to clear the notch holding it on, then pop it off toward the rear ... My CTS (3.6DI) has an under body shield. You have to remove a few push pin retainers and 4 10mm bolts to drop it. Easy 1 man operation since it ... Remove,grind,treat,etch,prime,paint. ... Oh yeah, and I take care to spray the bejeezus out of the FJ's undercarriage at the local car wash during ... Use a scraper, putty knife, or chisel while cold, and remove the majority of it. After driving it, using a pair of thick, leather gloves, then clean what ... They are there to keep everything clean and to create better aerodynamics. Very simple to remove. I think most are held by 8mm head screws. And yes, they weigh ... I have repaired bumpers and underside of cars in the following fashion.... Do not waste your money for the underside of your car.... Use plastic ...