Transform Your Underbody The Ultimate Plastic Removal Guide

VW, AUDI, SKODA, SEAT Plastic Undertray (Underbody) In this video I show you how I removed renovated and re-fit with an underbody undertray ... My CTS (3.6DI) has an under body shield. You have to remove a few push pin retainers and 4 10mm bolts to drop it. Easy 1 man operation since it ... If your car has these plastic shields, it's not really a matter of ... remove which I love. Removing older fasteners is usually a pain ... The easiest way (if there is such a thing!) is to remove the bottom tray and 2 side trays as one. Then hold the backing nuts with a pliers, ... The easiest way to ensure your underbody is kept clean in winter is to find a year round automatic car wash which has under vehicle ... I stopped slightly further ahead to check and the plastic/fabric panel underneath my car came off and was hanging behind. ... holding it to the ... They're shaped like a U, you just need to flex the bottom part of the tab down to clear the notch holding it on, then pop it off toward the rear ... If the center is stripped, you can drill them out with a 1/4 inch drill bit and pry off the remaining "washer" part with a screw driver. Toyota ... I was wondering if my car was still worth keeping?! Until everything ... It has been working well and oil changes only take 3 bolts to remove it. Two are on each side of car. The two pieces on the driver side overlap by about an inch and share bolts at their junction. I removed those bolts ...