Revolutionize Underbody Access A Step-by-Step Guide to Removing Plastic Obstacles

If your car has these plastic shields, it's not really a matter of ... remove which I love. Removing older fasteners is usually a pain ... How do I remove the damaged plastic panel? First, locate the fasteners holding the plastic panel in place. These are usually plastic screws ... If you want to track leaks, just remove it at night and slide a piece of cardboard under the front of the car. :dunno: It comes off in like 30 ... For More Info visit us at: http://1aau.to/h/cDw/ Does it sound like something is dragging underneath your car? It might be the plastic ... Remove,grind,treat,etch,prime,paint. ... Oh yeah, and I take care to spray the bejeezus out of the FJ's undercarriage at the local car wash during ... Jack it up, support it, crawl under and look. I'd bet it tore it loose from the screws and they are probably still there. You may be able to zip ... A flat screw driver and socket wrench set should be all you need. There's many little plastic push tabs holding it in you can take of with flat screw driver. Funny, I had read all about this happening to everybody and was thinking that mine was holding up pretty well. ... Remove formatting. Strike ... If the center is stripped, you can drill them out with a 1/4 inch drill bit and pry off the remaining "washer" part with a screw driver. Toyota ... The rear ones are real easy to remove. Put the rear wheels on ramps, crawl under and remove the shields in question. There are some 10mm plastic nuts on some ...