Revitalize Your Engine Oxygen Sensor Bank 1 Replacement Guide

I bought one of these to replace. Look for the Denso part# 234-9135. $118, mine shipped was $129. 2011 INFINITI G37 3.7L V6 Oxygen (O2) Sensor ... On the way there my CEL came on. Since I was spending $1000 on tires they read the code for me and said it was an oxygen sensor. They asked if I ... XJ ( X351 ) - (P0030) Heated oxygen sensor Bank 1 Sensor 1 location & part # - Hi all, It's been a while since my last post. My multimeter says I've got 12 volts going to the sensor. Checked voltage at the connector. No broken wires anywhere. So, would that mean the o2 ... Code P0130 means that the PCM has detected a potential problem with the oxygen sensor voltage (or the air-fuel ratio sensor) or its circuit. Locating Oxygen Sensors: Identifying Bank 1 Sensor 1 (Upstream) and Bank 2 Sensor 2 (Downstream) 28K views 1 year ago This refers to Bank 1 Sensor 1. Finding Bank 1 is not difficult, but depends on the engine cylinder locations. For V6, V8, V10, V12, and W16 engines, whichever ... I took to autozone to get a code and this is what I came up with. heated oxygen sensor- bank 1 sensor 1. I have looked at the back searches, ... Brand New Genuine OEM Oxygen Sensor w/ connector ; 4 Wire; Heated Planar. Reference Part Number : 06A 906 262Q / 06A906262Q 0 258 006 245 / 0258006245/ 0 ... The codes are produced because the oxygen sensor in bank-1, sensor-1 is getting an out-of-range reading, not necessarily that the O2 sensor is faulty.