Transmission Diagnostics for the Modern Driver Code P0705

Check the wiring harness to make sure it's still connected and not damaged in some way. Next I'd price the gear range selector sensor (used if ... This content isn't available. RECALL ... Engine running, and the PCM detected the Digital Transmission Range (DTR) or Transmission Range sensor (TR) signal was out of its normal ... A P0705 code is caused by the range sensor itself. That's not always the case, though. This code can also be caused by a slight misalignment of the switch. This code is caused by either a faulty sensor on the trans or by a mis-adjustment of the shifter cable. TCM monitors the signal from the transmission range switch, and determines if the abnormal input is present or not. It is completely random when it goes into fault mode. I have been parked, sitting at a light, slowly accelerating, or flooring it and it has gone into fault ... The range sensor (neutral safety switch) likely just need to be replaced? Is this related to the recent transmission replacement, or a coincidence on the ... P0705 Transmission Range Sensor. You sensor wires to the sensor might be loose or disconnected. Could that cause the transmission to act the way it does? The ECM determines that there is a problem with the switch or related parts if in receives more than 1 position signal simultaneously.