Transmission Control Malfunction (P0705) The Essential Guide for Car Owners

The transmissions gear selector cable might be binding somewhere or the NSS may even be loose on the transmission. You'll have to check it. OBD2 ... P0705 Transmission range sensor circuit malfunction (PRNHL). ... Getting this code when under a heavy load going over 55mph. I took the three ... P0705 shows that a Transmission Range Sensor (TRS) input error has been obtained by the Engine Control Module (ECM) or Transmission Control Module (TCM). Possible causes - Faulty Park/Neutral Position Switch - Misadjusted Park/Neutral Position Switch - Park/Neutral Position Switch harness is open or shorted. This code is caused by either a faulty sensor on the trans or by a mis-adjustment of the shifter cable. P0705 on Versas never comes from a bad Range Switch, it comes from crosstalk between the reverse lamp circuit and either the brake or tail circuits. It will start sometimes, M&S lights blinking, no windows working, turn signals not working and its not shifting out of park. I have a P0705 code that according to google and a couple of Jeep forums should be a transmission range sensor circuit malfunction or the neutral safety switch. TCM monitors the signal from the transmission range switch, and determines if the abnormal input is present or not. Check the wiring harness to make sure it's still connected and not damaged in some way. Next I'd price the gear range selector sensor (used if ...