Key Entrapped in Ignition's Clutches A Comprehensive Guide to Unlocking Its Freedom

But if the pin is just stuck for mechanical reasons, sometimes physical force can get it to release. So, try moving the steering wheel back and ... then turn the large knob to the left-- to disable exterior lights. ... then see if you can remove the keys. If not.... try to connect jumper ... Just turn the wheel a little bit and the key will come out. :rolleyes: Heaven doesn't want me and hell is afraid I will take over. sometimes the shifter doesnt see the car in P, so it wont let the key out, you have to hold the brake and slide the shifter in D then back in P ... Just a quick spray of WD-40 takes care of it. In fact you can squirt the stuff in there without taking apart the mechanism. The locking pins release with current flow from a solenoid inside the E415 ignition key slot. So the E415 must have power to release the key. No ... A shot of oil in the lock cylinder may help. DO NOT USE GRAPHITE! Use a light oil, such as wd40, pBlaster, Houdini, etc. But yes, if the ... With the engine off, shifter in park, your foot on the break, quickly press and release the shifter button a few times. Do this without shifting ... The key will not remove from the ignition immediately tried a couple minutes later and it removes turn the back on turn off stuck in ignition again for a ... Check the condition, and the tightness of your battery connections. They can loosen up over time. You should not be able to wiggle the terminals ...