Fog Lights Puzzling Unraveling the Electrical Maze

On the other hand, you mentioned that the driver side is shorted to ground. If wiring were fine, that should cause the passenger side to show ... In line with the above, fogs would put a huge extra load and strain on the low beam circuit and not only blow a fuse but mess up the buss at ... The problem is from that connector to the fog light and is probably a wire gone to ground somewhere when it wants to carry 12 volts to the fog bulb. Your best, safest, most reliable current-tapping bet is to tap the battery or alternator directly, or to run a separate fuse/relay off the ... Some people hook up their foglights directly into the POS of their driving lights. This is bad. Because the current and wiring that is going to ... Bulb would be my guess or maybe the positive plug on the wire is dirty or corroded. Image. ... fog lights. What do you prefer? But the last step is to properly adjust our brighter headlights so everyone on the road is happy. If you don't flip it and wire it up commonly color matched it will blow the fuse or blow the bulb. The connector does come apart pretty easily ... short to ground is when a power wire makes contact with bare metal or a ground. since there's no resistance from a component like a light bulb, ... Condensation could cause a short circuit and cause a fuse to blow but thats pretty rare. The fuse would blow (even a higher amp one) before the ...