Exceptional Acoustics Tweeter Optimized for 2x 4-Ohm Speakers

The resistors could be for impedance or protection, and probably specific for the tweeter. Using a preamp's tone control is sometimes better ... The “standard” 4-Ohm is not a worse speaker. The desire for a 2-Ohm system allows more power to flow from your head unit, or an amplifier. Capable of handling a crossover frequency as low as 2,000 Hz (@ 12 dB/octave), the TD25F-4 makes a great choice for use in compact 2-way designs. Product ... The speakers are 4ohm wired in series. There is a crossover and the tweeter is parallel to the speakers. I was thinking of just pulling the ... Crossovers are used to match impedance of speakers or make an amplifier able to handle running speakers with different impedance. maybe because good equipment can handle a 4 ohm load. ... ...and good amplifiers often double their power at four ohms. ... The Polk design team ... You need an amplifier that is rated for 2 ohms just to run the 4 ohm speakers without clipping. You will not only damage your amp or receiver ... But you shouldn't do it because the 4ohm speaker has different parameters than the 2ohm speaker, so it can cause phase issues especially if they ... If you connect 8 ohm speakers to your 2 ohm amplifier, the difference in volume will be even more noticeable, and it could potentially harm your ... DS18 is an Audio Electronics Manufacturer specializing in Pro Car Audio, Marine Audio, Jeep Audio, Powersports Audio, Motorcycle Audio, Home Audio and ...