Defeating Top Brake Light Persistency A Troubleshooting Masterclass

The brake light is activated in two possible ways: 1. A pressure-activated switch attached to your front brake light, usually mounted on the lower triple-tree ... If this is happening with the vehicle off and sitting, this can potentially kill the battery as well. I would recommend checkin the brake light ... the brake lights stay on without me pushing the brake, idk what to do? need help asap! ... :yup: your switch that the brake pedal presses\ ... Check for an earth fault on your tail lights. Theres probably a wire that comes off the harness and is grounded to a screw. You may have replaced one of the tail light bulbs with the wrong one. It may be shorting two circuits together. So the brake light stays on. Usually, it's the brake light switch. It has a little stopper on it that tends to break and fall off. Look at your floor, can you find it? If all 3 lights are staying on, I would inspect the sensor to be sure it's not out of position. If only the 3rd brake light is staying on, and ... the brake light switch is on the firewall under the hood at the rear valve cover.. It is ''Hot'' all the time, key on or off.. or on the treadle ... Have you inspected your brake light switch? It is on the arm your brake pedal is on. Look for the switch/plunger and verify that the rubber ... Are the tail light bulbs dual filament with the brake lights using same bulb, are you sure both bulbs are in sockets properly and not bridging ...