Car Clicking When Starting? Discover the Cause and Solution

A drained battery may be why your engine is making clicking noises and struggling to start. You can learn if your battery is dead by determining if you did ... Like he said, most likely is your battery. However, when the hold in coil is out on the starter solenoid it will do the same thing that you ... If you're hearing a single click, it is likely either your starter or your starter solenoid. Your solenoid contacts might be burnt, not allowing ... ... clicking sound under the hood, like you are trying to start the car with a dead battery. The car will start just fine, and afterwards no ... You tested the battery? Get someone to try jump start it and then get it checked after good run. As just bump starting just gives enough power ... When a starter makes a clicking sound but does not turn the engine, this is almost always what's happening: the starter solenoid moves the gear ... The clicking is the bendix gear shooting out to contact the flywheel and then bouncing back once it makes contact. I would take the battery to ... Weak or Dead Battery: A weak or dead battery is one of the most common reasons your GMC Yukon won't start and makes a clicking noise. A rapid clicking noise indicates that your starter's motor isn't getting enough electrical current to engage. If not, try and determine if the wires that go from ground to terminal could be corroded in there. By having the battery replaced it could have disturbed the ...