Unleash the Power Guide to Replacing Rear Passenger Bearing Hubs on 2012 Vehicles

... 2012 Chevrolet Cruze 2013 Chevrolet Cruze 2014 Chevrolet Cruze 2015 Chevrolet Cruze Tools you will need: • 13mm Wrench https://trq.video/oxe ... Youll need: new wheel bearing, new axle bolts (they use a special 18mm tripple square DRIVER) do not confuse em with the front, they use a 27mm socket. Buy AutoShack Rear Wheel Hub Bearing Pair of 2 Driver and Passenger Side Replacement for 2004-2012 2013 Mazda 3 2009-2013 Mazda 3 Sport 2006-2010 2012-2017 ... There's absolutely nothing special about wheel bearings/hubs. In fact, it may be easier and cheaper to replace the entire hub with the bearings. ... 2012 Nissan Rogue 2013 Nissan Rogue Tools you will need: • Flat ... Driver • Socket Extensions https://trq.video/obou-1AXAA00015 ... To get the old hub off, you need to remove the wheel, remove the brake drum, pry off the cap (Part #2), remove the nut (Part #28) and slide the ... Does anyone have a parts list for everything needed to replace the rear passenger side wheel bearing on a 2010 prerunner ... Former 2012 DCLB 4x4 ... Loosen the four bolts holding the hub but don't remove them. Leave the axle nut in place and use the slide hammer. Once it breaks free a little ... Step 1 - Put car on jack stands and remove rear wheels. Step 2 - Remove axle nut cotter pin, lock cap, and apply lubricant to the axle threads. Did my first one at work recently. Took me about an hour, including removing the hub and axle as a whole (the cv was seized into the hub, which ...