Transform Your Mobility Universal Joint Replacement for Boundless Living

The rzr yokes are much softer material and bend easy. So using the bench vise method is better than a press so you don't bend anything in my opinion. Just take off the U-joint using a 7/16 wrench. Slide the drive shaft out off tranny. Remove retainer clips with flat screw driver. Set the drive shaft on the ... Has anyone successfully replaced the u-joint on their two piece driveshaft? Those things appear to be non-serviceable. The rear flex coupling failed, so I removed the entire drive shaft to check the rest of the parts; So, has anyone had any success in just replacing the u-joint? First, try simply rotating the drive shaft back and forth by hand. If you feel clunking/play at either end, try to isolate/imobilize the other ... Step 15: Check the installation. Rotate the drive shaft several time to make sure the joint does not bind. Rotate it in both directions. There should be no need to rebalance the driveshaft. Most of the mass of the actual joint is close to the center, and they are pretty ... I found the U-joint that is the replacement for the "un-replaceable" one that has forced people to buy a new driveshaft assembly. The drive shaft u-joints cannot be replaced. However, the half shaft u-joints (between the differential and rear wheels) are. I'd take the joint out and remove the cup that doesn't have the C-clip on it and see what it looks like. If the cap won't go on enough to put ...