Master the Art of Steering The Ultimate Guide to Steering Couplers

unscrew them completely but leave them in the holes. Then just use a prybar from underneath to pull the gearbox down off the coupler. Even with ... You need to drive out the pin with a punch then the coupler body will come off the shaft by tapping with a hammer. A write-up on how to rebuild the steering coupler. In my opinion the column needs to be removed from the car to properly rebuild the coupler. 1"-48 Spline x 1-1/4" Smooth Bore; 1"-48 Spline x 3/4" DD Welded Coupler Assembly ... I have removed 2 nuts under the steering but could not drop the steering fully. It drops little but not coming down fully. As per the TSB there is 3rd bolt in ... BillWilliams ... There is not rotational stress on that coupler so any deformation should not hurt. As stated, there should be a braided strap or ... Steering, Suspension & Drivetrain - Steering Coupler Assembly - I have been trying to locate a steering coupler assembly for a 2001, ... Looking for pictures, tutorial, part number for the steering coupler for my 2004 Excursion so I can hopefully eliminate this slop in the steering wheel! A write-up on how to rebuild the steering coupler. In my opinion the column needs to be removed from the car to properly rebuild the coupler. This should be a three to four hour job with the proper instructions and the difficult part is removing the allen bolts on the coupler.