Engine Block Number The Engine Size Rosetta Stone

Check to see if the block number matches the vehicles VIN. I cut this from another website as to the location of the engine serial number: The easiest way to tell the difference is to check the 8th digit of the Vehicle Identification Number (VIN) on the original vehicle. The Plymouth has the 23" head and the Dodge truck has the 25" head. (All '37 & '38 half tons have the long block.) Both engines have the ID ... from a very confident, expert informed external inspection to a WAG for ad copy. Since GM did not VIN stamp these blocks you cannot say 100% ... These numbers are different than the stamped eight-digit number found on the right side of the engine. That number is the last eight digits of ... The casting number on the LS2 is located on the driver's side, in the rear, just below the deck surface. It's darn near impossible to get a photo of it in the ... The engine serial number is stamped into the metal and consists of a single letter followed by a 6 digit number. The casting number is larger ... The other numbers, smaller and possibly "deeper" stamps, would be very near the front edge of the pad itself, were the last segment of the VIN ... Motorcycle Serial Numbers · Vehicle Identification Number (V.I.N.) is located on the engine crankcase and is the same as the number located on ... The engine ID code stamping is located on a flat pad in front of the passenger side cylinder head (big blocks can be in the same location or above the timing ...