Effortless Smartcar Coolant System Bleeding in 10 Minutes

You need to bleed air out of the cooling system with the heater OFF to stress heat the engine block so it will heat up quickly and open the thermostat and ... Open the burp value while the car is cold then drive the car around until it reaches operating temp to let the system circulate. Changing the coolant the same as on any modern car. Drain the coolant out of the radiator petcock, Close radiator petcock. Add 50/50 water and coolant. first go ahead and put the cap on, turn the fan off and turn the climate control to cold. now shut your hood and sit in the drivers seat and ... Raise and safely support the front end of your car on jack stands. · Place a large drain pan under the radiator and remove the radiator cap. If ... As per other posts on the forum, the coolant level sits just on minimum but never drops. If I top it up to the max level, it just goes back to ... How to “BURP” Bleed Air Out of a Cars Cooling System - Easy DIY process for ALL makes ... Smart Car AMSOIL Radiator Coolant Change. Also squeeze the hoses to burp the air out with cap off the catch tank . I do mine a little at a time run engine up to temp,, then turn it off ... 2012 Smart fortwo coolant bleed process. Brad's ... Doing This Will Prevent Overheating & Keep Your Car's Cooling System Working Like New. Cap off and jack up the front of the car about 2-3 ft and the air pocket will just rise to the top...or you can use a pressure tester and pump ...