Effortless Coolant System Bleeding for Smartcars

Open the burp value while the car is cold then drive the car around until it reaches operating temp to let the system circulate. Fill and bleed the cooling system with coolant to the manufacturers specifications to complete the installation. ... Smart · SRT · SsangYong · Studebaker · Subaru ... first go ahead and put the cap on, turn the fan off and turn the climate control to cold. now shut your hood and sit in the drivers seat and ... Most systems are what is classed as self bleed so with the cap off you run it for a while and adjust level accordingly, usually after a repair ... Also, the pumps won't run dry, and must be primed with liquid before they will operate. Make sure to mount them at a low spot in your coolant system to avoid ... As per other posts on the forum, the coolant level sits just on minimum but never drops. If I top it up to the max level, it just goes back to ... The best way to drain the system is at its lowest point, in the smart's case they have actually installed a coolant drain plug that can be removed with a 6mm ... The bleeding procedure really doesn't say much - but to fill the reservoir, run the machine (with the coolant cap on) until the fan kicks for a 2nd time, shut ... To refill the coolant goes in the reservoir of course. To bleed the system the car needs jacking up at the front then running with the cap off. The system is self bleeding so shouldn't need bleeding, hense no bleeders in the system. It can be a slow process! If you want to tho you can ...