Exceptional Tie Rod Removal The Tool That Elevates Mechanics

A dead blow hammer is a real advantage. TORQUE the nuts. You get some big jackass over-tightening the studs, it can ruin things and make them ... 6) You need a 15mm wrench to hold the inner tie rod and a 24mm wrench to undo the tie rod end locking nut. You also may need the 24mm to undo ... Do you need a tie rod puller? There's a special tool for outer tie rods, inner tie rods, pitman arms, etc. They come in all shapes and sizes, but the right ... Ok, Merry Christmas to all.. So last night while scanning HF site I stumbled upon the inner tie rod removal tool on clearance for $16.95. 996 Turbo Forum - Inner Tie Rod - removal tool - To remove the inner tie rods, I've seen that a specialty tool is needed. big hammer does the trick. did two cars this weekend without a problem. christx ... Also, a tool that makes life better is the Ford Camber/Caster wrench. It looks like a bent single boxed end wrench. You can also use a 1 1/2" ... Turn your steering wheel so the rack retracts back in. They come off easily once the torque is applied a straight direction with a breaker bar. A 15" adjustable wrench will do the trick. Actually works much better than the official inner tie rod end removal tool, which I bought and found ... I made a holder for the DLE with two 18" pipe wrenches side by side and C-clamped together (one on each side of the stud). The wrench handles ...