ABS Fault Light A Guide to Troubleshooting and Resolution

Anti-Lock Brake System (ABS). If there is an ABS malfunction, the warning light comes on in combination with the brake warning light. While nearly every car has an anti-lock braking system (ABS) light that comes on to notify you when you are losing traction, engineers found a ... The ABS fuse, brake fluid levels, and emergency brake are the most frequent reasons for why an ABS light will come on, but there are other ... The most common problem is magnetic trash at the wheel sensor. Very simple fix - disconnect the wheel sensor at the brake. Hey guys I hope someone can help me out, I drive a 2008 Ford Escape. When I am in a parking lot driving at low speeds the ABS light and ... First, it should be noted that the ABS light is supposed to illuminate for a few seconds after you turn the key, as part of a system test. If the light stays ... It turns out to be the wheel bearing that was worn out. When ABS light turns on first check the wheel bearings, it will save you a lot of money. It's rare, but ferromagnetic material can accumulate on the ABS sensor and interrupt the signal, triggering the warning light. Revzilla photo. Firstly, you should check your brake fluid reservoir to ensure that the levels aren't too low, as the ABS warning light can be activated if the ... One of the various reasons for the ABS light to illuminate and stay on is a faulty wheel speed sensor. Wheel speed sensors are located inside ...