Unleash the Power Resetting the Throttle Position Sensor for Enhanced Throttle Response

turn key on, wait for dinging to stop, a few seconds, push throttle pedal slowly to the floor, then let off quickly, turn key off. Repeat this ... Make sure you do this with a Cold engine. Same with any vehicle you do this to. See linked video to reset the main computer ECU as well. Turn on the IGNITION SWITCH, wait for the CEL (Yellow engine light) to turn OFF.... ... Turn off IGN only... wait for 10 seconds and repeat this ... "Discover step-by-step instructions on how to reset the Throttle Position Sensor on a Honda. This comprehensive guide covers popular models ... The mechanic will turn the car off and disconnect the negative battery terminal. They'll wait 5 to 10 minutes. This allows the engine control unit (ECU) to ... ... Sensor; Driver And Passenger Knee Airbag; Mykey System -inc: Top Speed Limiter ... position; If the vehicle you are purchasing is new or used; The length ... f250 f350 Throttle Position Sensor reset calibration for the 7.3 liter powerstroke diesel engine. Set the TPS voltage to .7VDC by taking a reading, with the key on, from the blue wire at the TPS. The final step before you can ride your new TSP Tuned map is to make sure you reset the powervalve and set the TPS to 0.40v. Set up your Flash Tool. Click on Diagnostics, then click on My Bike, then Throttle Position. The Flash Tool will prompt you to turn on the key at the proper ...