Revamp Your Ride Resetting the Throttle Position Sensor for Optimal Performance

Step-1: Turn Your Key ON First off, use your remote to unlock the Ford truck. After that, we have placed the key on the ignition and turn it on. A lot of people have asked me if they should perform a throttle position sensor reset when their car starts to idle like crap or hesitate ... 1) With the car off and key out of the ignition, put the accelerator pedal to the floor and hold it there. 2) Insert the key, turn to the on ... ① Engine responsiveness: Throttle position reset ensures an accurate relationship between accelerator pedal input and engine response. If the ... I'm a newbie and am just learning about how to maintain my bike. incidentally, great site! Have learned lots & thanks for posting the TPS setup. To zero the TPS: 1. Set the Run/Stop switch to the Run position. 2. Turn the ignition key to the On position. 3. With the engine off, rotate the throttle grip. Hold the kill button down. hold it starter button for 3 seconds. or so and then with no gas. and hold it wide open like this. 3 seconds all set. Wait 3 seconds. 3. Fully depress and release the accelerator pedal 5 times within 5 seconds. 4. Wait 7 to 10 seconds. 5. Fully depress the ... The easiest way to reset your throttle position sensor is to unhook the negative cable from your battery for up to five minutes or to remove the fuse for your ... Set up your Flash Tool. Click on Diagnostics, then click on My Bike, then Throttle Position. The Flash Tool will prompt you to turn on the key at the proper ...