Master the Art Power Seat Button Clicking Sounds Silenced

The clicking noise issue was solved with replacing the part below, and it was easy to replace the part that is under the driver seat. Transfer ... It kind of sounds like the seat track rail on the driver's door-side but it could also be the hinge area where the seat back meets the base. It's coming from something metal like the frame of the seat, the track or the mounting. If I had to say, I'd say somewhere between below my ... Make up a jumper wire and apply power and ground directly to the motor to see if it operats. Press the start button and see if the voltage drops. If the starter doesn't work, but the voltage drops substantially you have problems in the ... The clicking happens either when i insert the key or press the 'start' button. When i remove the key, the buzzing starts, then it all stays on. I then could make it happen pressing into the seat it would make a clicking popping type noise from what sounded like the right bolster of the ... Press the switch in both directions, does the MOTOR make a clicking sound? Not the switch, the motor? When you replaced the motor, did you ... Pushing recirculate button causes noise to change and get worse. ... I would remove the fuse in the fuse panel under the back seat that controls ... I figure pushing the lateral part of the seat pushed and fixed the moving and creaking of the firewall. So as a solution I folded and ...