A/C Port Pressure Decoded High vs Low Pressure Explained

I've got high pressure (80psi) on the low pressure line. According to Google that's caused by too much refrigerant or clogged condensor. I rented the gauge set at Autozone and compressor off,I had approx. 95 psi on high and low side. Compressor on, low: 45-50 high: 198-200 and ... The AC low pressure service port is directly behind the engine, about 5-6 inches back, in the center. Look for the two silver pipes coming out ... The low-side service port is a quick-connect fitting that provides access to the low-pressure side of the A/C system. You need to evacuate the system vacuum it and then recharge it . if the system has zero/low pressure and the can has high/higher pressure then ... A/C pressure switches are installed in the high pressure side of the system, between the compressor and the receiver/drier. The objective is to ... Locate the Low-Side Service Port ... This port is typically found on the line connecting the accumulator and compressor. The high side fitting is located between ... Mitsubishi Diamante - Low side a/c pressure port? - Purchased an a/c recharge kit to boost my a/c and I am having trouble finding the low ... Asking because we at the shop charge through the high side port, but it takes way longer and sometimes the machine can't even pump it well ... Typically, when the pressures are equal, and the compressor is engaged, then the compressor is bad. That said, those compressors don't usually fail internally ...