Braking Unleashed The Interplay of Front and Rear Wheels

When you brake, the weight of the car shifts from the rear to the front. To stabilize the vehicle, front brakes must lock up first. If the rear ... REAR BRAKE 101 ... One of the many design factors that goes into the development of a base braking system is the mysterious "bias" or "balance." Truth be told, ... The front brakes pull the most weight, even though both sets help stop the car. More pressure lands on the front wheels when you brake because the car's weight ... This means the rear brakes pull more than their share of the weight. Once the rears are clsoe to breaking traction, the brake force is capped or ... This is because of the clearance needed over the PP Brembo brakes, it seems... at 2:51 onwards... www.polestar-forum.com. Whereas the foot brakes are applied by a foot pedal and control brakes on the front wheels, the handbrake activates braking components at the rear of the ... First, Toyota says that discs aren't necessary in the rear because rear brakes are less susceptible to heat fade than front brakes. The ... When we apply the brakes, more force is transferred to the front tyres as the car's weight gets transferred to the front. This results in more friction and ... However, in an emergency situation, about 10% comes from the rear brake and 90% from the front brake. Don't Lock The Rear Wheel. If you are too ... First, the front brakes tend to do more work, especially under hard braking. Second, rear brakes are generally smaller; and will wear faster ...