P0306 A Definitive Guide to Cylinder 6 Misfire Repairs

P0306 is for a misfire. Replacing your plugs and ignition coil most likely fixed this. P0206 is an injector fault, or faulty wiring to the ... Repair Information & Causes For The Generic OBD Code P0306! Shop Crankshaft Sensor, Camshaft Sensor & More To Fix Error Code P0306 From Partsavatar.ca. Swap an ignition coil from cylinder 4 to cylinder 6 and see if the misfire moves. If it doesn't, then yeah, check injectors next. I'm now getting this P0306 error code. I have a new coil, cap, rotor, plugs and wires (all AC Delco except the wires, they are Autolite Professionals ... My OBDII reader returns code P306 (cylinder 6 misfire). I didn't turn on the engine again. Waiting for the tow truck now. Cylinder 6 started misfiring horribly last week (code P0306). It's never misfired before. It would run rough and then stall at idle. Forced Induction - misfire cylinder 6 mystery - Hey guys, so about 2 weeks ago i had a misfire cylinder 6 p0306 code. The P0306 code stands for “Cylinder 6 Misfire Detected,” which means the powertrain control module (PCM) has detected that cylinder #6 did ... The misfire is in the physical 6th cylinder (front bank far drivers side) or the 6th cylinder in the firing order (front bank far passenger side, physical ... When the code P0306 is set in the Powertrain Computer, it means that the Misfire Monitor has detected more than a 2 percent variance in RPM between the firing ...