Protect Your Home The Importance of 40 Amp Fuse Protection

The REDARC 40A Fuse Kit is equipped with high-quality fuses and fuse holders to fit the cable required for the specified current and make a solid connection ... Disconnect the electrical wiring then try a new fuse. If it doesn't blow, then I'd remove the SAI to try running it on the bench. Compact fuse for main or branch 30 to 200 Amp circuit protection. MIDI/AMI ANS-40A Fuse 40A 40 Amp, 32V 48V Max, Automotive. +13 options. Available in additional 13 options. From $19.99. MIDI/AMI ANS-40A Fuse 40A 40 Amp ... GM Genuine Parts Wiring Fuses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE ... I might do this as a (very) temporary way to get something working if I knew why the old fuse burned up. I would then replace it with a 30 amp ... the fuse holder is part of a #10 black or dark blue wire. that wire is installed on the master relay. it is on the same stud that the 12 volt battery supply ... The most likely cause of this is the starter itself. This is a pretty large fuse and it feeds not only the starter but the ignition switch as well. RobH ... They are BOTH rated to carry 40A indefinitely Ralph. The time-to-blow depends on the degree of overload for both but the standard size ... No you should not, but in theory yes you can although it would defeat the purpose of the fuse. If a circuit or appliance is designed for 30 ...