Fuel System Monitor Enigma Cracking the Code for Readiness

I paid them to reflash the system as that was the known remedy for the “fuel system monitor not ready” issue. It fixed the issue, but now o2 ... In order to run the monitor, it needs to see: Ambient temp needs to be between 40f. and 95f. Also the difference between engine coolant temp and ... I read a response on a non tech site regarding saturn drive cycles that you must also cold start with the fuel level between 15 to 85 %, and do ... Is Your Evap system not ready? Want to pass the emission test successfully? Learn about the importance of the Evap screen and how to ensure ... So even after two weeks and 550 miles, the catalyst monitor is still not set. I ... Evaporative system monitoring: Not installed. Secondary air system ... Well it happened to me and we had to replace the fuel system. I screwed up and inserted the wrong propellant into the tank and then proceeded to ... If you miss any of the marks, the cycle will end and you'll have to start all over. One of the mistakes I made was not maintaining the proper ... ... not the heater, and the secondary air system ans so on, Can't wait to go ... not to get ripped off and just look into getting the monitors ready. Back. What component of the EVAP system is not ready? ... During this step the OBDII system checks for ignition misfire, fuel trim and EVAP canister ... You have to do a couple "drive cycles" to get all the monitors to read "ready". ... 20 minutes of stop-and-go driving with at least four 30-second ...