Master Tire Care The Comprehensive Schrader Valve Oil Guide

How do I add oil if I change the fork oil? ... i took the hex caps off and drilled and tapped the them to fit schrader velves i got from the auto ... This oil will keep the valve rubber seal a little flexible instead of being hard. I actually did this on the low pressure valve and there is no more hissing ... ... oil spraying out through the valve too? Shock stood up, off truck. Pressed Schrader valve in, and felt like most of the oil came out with ... I'm trying to get my A/C working again on my 88 4Runner. Long story short, Many years ago I had converted the system to 134A (oil change, ... Screw it up and you get freon spraying oil everywhere. I've found a drop of PAG oil on the thing helps to improve the seal on new ones since ... Your on the right track Jeff. I have a stickied thread in the general help area that will show it more if need be. Just a regular schrader valve tool, you can ... The new compressor may have had likely more (or even possibly less) oil in it than your original compressor. A tad too much oil may be ok, but ... This leaky Schrader valve seems to be the original valve core and is stuck... ... oil in the mk2 a/c system. By proper conversion, I mean ... HENRY 9298,9298,Henry Valve,Oil Level Control POSITIVE OIL EXCHANGE VALVES 1 ... Pressure gauge connection with Schrader valve; Full port valve for fast ... Refrigerant oil becomes saturated with refrigerant like soda-pop is saturated with CO2. The little bit of oil that gets into the schrader ...