OBD II Connector Pins A Comprehensive Guide for Technicians and DIYers

Pin 2: Used by SAE J1850 PWM and VPW; Pin 3: Used by the manufacturer ... The OBD-II port has been available in vehicles for many years, but it's only ... The OBD2 port features a configuration of 16 pins, each with a unique role: Pins 4 and 5: Provide grounding for safe and accurate data ... Just a black & red wire sounds like a ground & power connection. If the black wire was plugged into OBD2 port pin #4 or #5, and the red wire was plugged into ... Hello. Been having a heck of a time getting readings out of OBDII port. Replaced all the pins, still getting the same issue, so I'm assuming one ... (COMPATIBLITY) All 16 Pins Connected with different colors wires for different applications, and great for DIY and homemade projects. Wires on connectors are 26ga, too thin to mate with car's 16 or 18ga wiring harness for a reliable repair without added strain relief. I have voltage (12v) at pin 16 so the scanner gets power. Voltage between the ground pins (obd pins 4 and 5) and the CAN (high pin 14 and low ... The OBD-II Port or Data Link Connector (DLC)​​ It is a multi-pin (commonly 16-pin) diagnostic connection port in vehicles to implement vehicle diagnostics ... Most OBD2 solutions only populate part of the cable. For example, many won't contain both single wire CAN and Keyword 2000. * The OBD adapter can be left ... You should probe the DLC system you are working on at the Pin #6 or the Pin #14 Positions and at the Pin #4 and Pin #5 locations for Grounds in ... Type of enclosures accessories. diagnostic connector OBD II ; Related items. A-OBD-A, A-OBD-F, A-OBD-L, A-OBD-M ; Kind of connector. female ; Number of pins. 16 ...