Demystifying Camshaft Sensor Bank 1 Location A Step-by-Step Manual

Each cylinder head, (bank 1 on the right side, and bank 2 on the left side), has two camshafts, with a camshaft position sensor, (CMP), ... This is bank camshaft position sensor 1 of the 2003 g35 coupe coloring diagram harness that needs to be configured to its correct position. 3.6L CMP (camshaft position) sensors (one per bank) are located on top of valve covers, near rear of engine and secured by T30 screws. Bank 1 is the right side head. With the correct ECM PIDS on a scan tool you can see if the cam sensors are ON or OFF when starting and running. I will be attempting a bank 1 camshaft position sensor R&R this weekend. ... thank you very much for the diagram. I will give it a shot ... Advance Auto pulled a "P0015 - "B" Camshaft Position - Timing Over-Retarded (Bank 1)" code. Googled it and see the following reasons ... ... camshaft bank 2 gets angled, and exhaust camshaft bank 2 gets a straight. ... Bank 1 is going to be the angled sensor on the passenger side. On ... Anyone have the wiring schematic/diagram for the Camshaft Position Sensor Bank 1, and its circuit? I looked for what I could find. cam shaft position sensor bank 1 melted, the connector is also melted. Think maybe this crap sensor shorted itself out internally, due to the ... The Camshaft Position (CMP) sensor consists of a magnet and an iron core which is wrapped with copper wire, and is installed onto the cylinder head. When the ...